The buddy check, step by step
Before every dive, you and your buddy check each other’s gear. Walk through it here, then test yourself.
Buddy check
Walk through it
All checked. Give your buddy the OK!
Test yourself
PADI teaches it as BWRAF: BCD, Weights, Releases, Air, Final OK. At PR Dive we remember it as ‘Big White Rabbits Are Fluffy’.
These tools are general guidance, not a substitute for your training, your dive computer or medical advice.
Why the buddy check matters
It takes a minute, and it catches small things on land before they turn into problems underwater: a tank valve that isn’t fully open, a BCD that won’t inflate, a strap that isn’t fastened. It also shows you where your buddy’s gear is, so you know where to reach if they need help.
The five steps
- B, BCD: inflate and deflate it. Know where your buddy’s inflator and dump valves are.
- W, Weights: weights are in and secure, and you know how your buddy releases them.
- R, Releases: every buckle and strap is fastened, and you know how each one opens.
- A, Air: the tank valve is open. Breathe from both second stages and watch that the gauge needle doesn’t drop. Know where your buddy’s alternate air source is (more in our regulator guide).
- F, Final OK: mask, fins and computer ready, and one last look over each other.
Do it before every dive, even with a buddy you’ve dived with for years.
Been a while?
A Scuba Refresher goes over your gear, the buddy check and the basic skills with an instructor before your next dive.