Regulators
Servicing for first stages, second stages and octopus.
Bring your gear in
Regulators, BCDs, tanks, spearguns and high-pressure compressors, serviced at our Bayamón shop. Air fills are usually same day; service takes longer.
Equipment service
Recreational, technical or professional, we service gear for every kind of diver. Tell us what you have when you drop it off. We inspect it, then confirm the work and the price with you before we start.
BCDs
Servicing and inspection of inflators and valves.
Spearguns
New bands, tips and lines.
Dive computer batteries
We replace batteries on computers with a user-replaceable battery. Sealed computers usually have to go back to the manufacturer. Ask us about your model.
How service pricing works
We don’t post one price, because every regulator and BCD is different. What changes the cost:
- Brand and model. Each manufacturer has its own service kit and procedure.
- How many pieces. First stage, second stages, octopus and gauges are each serviced.
- What we find inside. Corrosion or worn parts beyond the service kit add to it. We show you before we replace anything.
Want a rough idea first? Send us the brand, model and when it was last serviced (form, call or WhatsApp). Then we inspect it and confirm the exact price before any work.
Our service promises
- We inspect your gear first, then confirm the work and the price with you before we start.
- If we find something you haven’t approved, we check with you before doing it.
- We always give you back the O-rings and parts we replace.
- We follow each manufacturer’s service intervals and procedures.
What to bring when you drop off
- The whole piece of gear: first stage, second stages, octopus and gauges together for a regulator; the inflator hose with a BCD
- Your last service paperwork or receipt, if you have it
- A note of anything that’s been wrong: free-flows, leaks, hard breathing, sticking buttons
- Your name and phone or WhatsApp number, so we can confirm the work before we start
Authorized service
We’re authorized to service regulators and BCDs from these brands. We can often service other brands too, depending on whether service kits are available.
“Always a pleasure getting tanks filled…”
From the service bench
What we find when we open up gear. This is why regular service matters, and why we show you what we find before we fix it. The full story of one regulator.
Tank inspections
- Visual inspections. Inside and outside checks of the cylinder and valve.
- Hydrostatic testing. The periodic pressure test cylinders need to stay in service.
Not sure when your tank is due? Bring it in and we’ll check the stamps and sticker for you, or use our gear service checker.
Fills
Same day
Air
Drop your scuba tanks off and pick them up the same day.
Give us notice
Nitrox, 28–40%
We blend nitrox midweek. Tell us ahead of time and we’ll have your tanks ready. You need a nitrox certification card. More on nitrox fills.
SCBA, paintball & airsoft
We also fill SCBA cylinders and paintball and airsoft tanks.
Before every fill: we look over every cylinder before we fill it, and scuba tanks need an in-date visual inspection and hydro. If a tank doesn’t pass, or we’re not comfortable with it, we won’t fill it. That’s for your safety and ours. Why we won’t fill a tank, and how to make sure we can.
Oxygen and nitrox blends above 40%: by special request only, for oxygen-clean cylinders and divers with the matching certification. Call us to discuss.
Air quality: our air is tested every quarter. The latest certificate is posted in the shop, where you can see it anytime.
High-pressure compressor service
We service high-pressure breathing-air compressors from established makers such as Max-Air, Bauer, MAKO and Coltri, from routine maintenance to repairs.
Call or email us with the make, model and hours on your compressor, and we’ll tell you what we can do.
We don’t work on
- Low-pressure garage or shop compressors
- Unbranded compressors
Common questions
Which brands do you service?
We’re authorized to service regulators and BCDs from Atomic Aquatics, Cressi, Hollis, Oceanic, Sherwood, XS Scuba and Zeagle. We can often service other brands too, depending on service-kit availability.
How much does a fill cost?
Call us at (787) 436-7047 for current fill prices.
How long does service take?
We don’t quote a turnaround time until we’ve seen the gear. We inspect it first, then confirm the work and the price with you before we start.
Can you fill my tank today?
Air fills are done the same day. Nitrox is blended midweek, so give us notice. You need a nitrox certification card.
Do you fill SCBA, paintball and airsoft tanks?
Yes.
Do you do tank visual inspections and hydrostatic testing?
Yes, both. Not sure when your tank is due? Bring it in and we’ll check it.
Can you change my dive computer battery?
It depends on the model. We replace user-replaceable batteries. Sealed computers usually have to go back to the manufacturer.
Do you service compressors?
High-pressure breathing-air compressors only, from makers such as Max-Air, Bauer, MAKO and Coltri. We don’t work on low-pressure garage compressors or unbranded units.
How do you check your air quality?
Our air is tested every quarter. The latest certificate is posted in the shop, where you can see it anytime.
Do I get my old parts back?
Yes. We always give you back the O-rings and parts we replace. If we find something you haven’t approved, we check with you before doing it.
How often should my gear be serviced?
We follow each manufacturer’s service intervals. Bring your gear or its paperwork and we’ll tell you where it stands.
Start a service request
Use whichever is easiest for you. Every request goes to the same place, and we reply from info@prdive.net or by phone.
Walk in
Bring your gear to the Bayamón shop, Mon–Sat 10 AM – 5 PM.
Call or WhatsApp
(787) 436-7047
Send the form
Fill it in below and we’ll get back to you.